It would be great to get those scanned. It seems that documentation of the O-I
display devices and related power supplies is quite rare, so it would be good
to make sure whatever is available gets collected.
I have power supply documentation (copies), will try to get those scanned.
paul
> On Oct 4, 2017, at 8:27 PM, Gary Oliver via cctalk <cctalk@classiccmp.org>
> wrote:
>
> I found the manuals for my unit, but it appears older than yours - perhaps
> one of the original units.
>
> The hardware manual describes the model "512-60 DIGIVUE display/memory unit,
> D141."
>
> The electrical connections are .1 inch dual-row edge-connector style; 60 pins
> for data/control (half are grounds) and 30 pins for power. The connectors
> are described as "Amp Twin Leaf Printed Circuit Edge Connectors."
>
> However, it does have copious schematics, so you may get some use from it.
>
> I should be mailing it out by this weekend.
>
> -Gary
>
> On 10/02/2017 10:25 PM, Josh Dersch via cctalk wrote:
>> Hi all --
>>
>> I find myself with an Owens Illinois Digivue plasma display, model
>> designation MDXVI. This appears to be a later model than the ones used in
>> the PLATO IV and V terminals and I can't find any real information on it.
>> This one has two D-sub connectors on the rear -- a 15-pin for the power
>> supply and a 25-pin for everything else.
>>
>> Love to know what the interface specs are so I can make the display do
>> something interesting. Schematics would also be nice. Anyone have any docs
>> stashed away?
>>
>> Thanks,
>>
>> Josh
>>
>
> --
> -Gary
>
