I had a failure of a Corcom filter in my Rainbow, it was a different model to yours though, it too had failed short. I found a Power Entry Module on the Farnell site and made a crude panel for it to mount it, just like the socket you are talking about. I would just look at the datasheet to get the dimensions and find one that will fit. Paul is right of course, that you don't strictly need one to make the machine work though.
Regards Rob > -----Original Message----- > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Aaron > Jackson via cctalk > Sent: 22 September 2017 17:12 > To: cct...@classiccmp.org > Subject: EMI filter in PDP-11/23 > > Hi all, > > The EMI filter in my PDP-11 (11/23+) chassis has failed and appears to be a > dead short. I've had a browse on the web but thought I would ask here if > anyone knows of a fitting replacement? > > It's a Corcom F2932C, 5A at 250V. The small IEC sockets with built in 5A EMI > filter was my first thought, but I think they might be a bit too long to fit within > the steel housing. > > Does anyone have any suggestions? > > Thanks! > > Aaron. > > > -- > Aaron Jackson > PhD Student, Computer Vision Laboratory, Uni of Nottingham > http://aaronsplace.co.uk
