Mattis said > Well. Nobody has posted any thing about RC11 schematics, unfortunately. > Maybe someone has a paper copy that could be scanned? Or that I can borrow > to scan? > > With the RS64 and the RC11 it would be possible to run DOS/BATCH 11. Could > be interesting to test it on the real hardware. > > Are there any other RS64/RC11 owners out there that has them running? Jay > Jaeger lists a RC11/RC64 as part of a PDP-11/20 system on his web site.
I acquired an RC11 flip chip set with the FOX 2 (PDP-11/15). Although I don't have a schematic for them, I do have the schematic print set for the controller for the fixed-head / drum that Foxboro supplied which was a DDC 6200. This set is in the same folio binding as the PDP-11/15 print set. The schematic covers the indicator panel (looks a bit DECish) and so on. Foxboro had their own DBI bus which pluggned into the Unibus, I have not looked at the prints closely enough to tell you much more than that, or whether they would be useful to you. Although I have the RC11 set there was no trace of a the drum when I recovered it. Steve.
