Hello! I recently received a HP9816 machine. The previous owner originally got the machine without a keyboard but subsequently sourced a keyboard off ebay.
Unfortunately this keyboard was not in the best shape. One key was stuck and when taking it apart it was evident that it has taken a bath for quite some time. At least the electronics around the space bar were quite affected with corrosion. Luckily this keyboard is quite simple design with only CMOS 4XXX IC, and better yet, Tony Duell has already reverse engineered it (together with the rest of this little machine). Thanks a lot Tony! But the stuck key appeared to be cause by the "plunger" (is that the correct english word?) is slightly cracked in the corner. When the keytop is inserted it is not sliding very well. I have not found a method of repairing it so I am asking the community if there are anyone that has spare "plungers" for the HP9816 keyboard. http://i.imgur.com/q5aRQnC.jpg?1 http://i.imgur.com/67xWZ8q.jpg?1 http://i.imgur.com/cGWCKFw.jpg?1 This is the keyboard at the hpmuseum.net page: http://www.hpmuseum.net/images/200serieskeyboardsmall-35.jpg /Mattis
