Hi Philipp I'm interested. How much did a board from the previous batch cost? And will that be any indication of what the new boards price?
Thank you, Pontus On Mon, Feb 13, 2017 at 04:00:26PM +0100, Philipp Hachtmann wrote: > Hi folks, > > it has taken a while but I'm now actively planning to shift out another > batch of OmniUSB boards. The last batch is sold out for a long time and I've > been asked for more from time to time. > > As some of you might remember, it's a cool device to connect your > pdp8/f/a/m/e to the modern world using lightning fast USB. > > The originial board has it's website here: > > http://pdp8.hachti.de/projects/omni_usb/ > > The new board will do the same, perhaps even more. > > - the USB connector will be replaced by a mini (NOT micro!!) USB connector. > - The connector position and cable routing will be improved. > - The board will be shorter. But it will come by default with a laser cut > acrylic extension that makes it full size again. > > There will be at least those options to buy: > > - Kit (board + all parts) > - Kit+ (board + all parts, SMT already assembled) > > Possible: > - complete version - Everything soldered and tested. > - discount for omitting acrylic extender > > I cannot guarantee that I can deliver fully assembled boards (regulations) > and would be able to do that only if there's a reasonable number of > interested buyers. > > If have set up a doodle poll to get a realistic picture of the interest in > the board/kit/device: > > http://doodle.com/poll/d7y524mvyfezqp9w > > PLEASE take the minute and fill in your name (ideally that I can recognise > you) and check the options which most precisely match your demands. > > PLEASE be as honest as possible as I will base my decisions IF and for which > PRICE I can run the show. > > Thank you!!! > > Kind regards > > Philipp :-) > > > > > > >
