Thanks for doing this project and I have signed up! Curious why mini usb and 
why the exclamation points regarding "NOT micro?" Micro is so common. I have 
tons of usb-micro cables for all my devices. I don’t think I've seen a device 
made in the last several years with a mini. I have no mini usb cables, not that 
I can't purchase one, of course!

Eugene W2HX

-----Original Message-----
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Philipp 
Hachtmann
Sent: Monday, February 13, 2017 10:00 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: New batch of pdp8 OMNIBUS to USB interface! Please Read and react!

Hi folks,

it has taken a while but I'm now actively planning to shift out another batch 
of OmniUSB boards. The last batch is sold out for a long time and I've been 
asked for more from time to time.

As some of you might remember, it's a cool device to connect your pdp8/f/a/m/e 
to the modern world using lightning fast USB.

The originial board has it's website here:

http://pdp8.hachti.de/projects/omni_usb/

The new board will do the same, perhaps even more.

- the USB connector will be replaced by a mini (NOT micro!!) USB connector.
- The connector position and cable routing will be improved.
- The board will be shorter. But it will come by default with a laser cut 
acrylic extension that makes it full size again.

There will be at least those options to buy:

- Kit (board + all parts)
- Kit+ (board + all parts, SMT already assembled)

Possible:
- complete version - Everything soldered and tested.
- discount for omitting acrylic extender

I cannot guarantee that I can deliver fully assembled boards
(regulations) and would be able to do that only if there's a reasonable number 
of interested buyers.

If have set up a doodle poll to get a realistic picture of the interest in the 
board/kit/device:

http://doodle.com/poll/d7y524mvyfezqp9w

PLEASE take the minute and fill in your name (ideally that I can recognise you) 
and check the options which most precisely match your demands.

PLEASE be as honest as possible as I will base my decisions IF and for which 
PRICE I can run the show.

Thank you!!!

Kind regards

Philipp :-)







Reply via email to