On Wed, Nov 23, 2016 at 12:39 PM, Henk Gooijen <henk.gooi...@hotmail.com> wrote:
> > > > Van: Guy Sotomayor Jr<mailto:g...@shiresoft.com> > Verzonden: woensdag 23 november 2016 17:29 > Aan: General Discussion: On-Topic and Off-Topic Posts<mailto:cctalk@ > classiccmp.org> > Onderwerp: Re: ISO: PDP-11/40 LTC and Stack Limit options > > > > On Nov 23, 2016, at 7:11 AM, william degnan <billdeg...@gmail.com> > wrote: > > > > > > 3) I would not mind getting something like Guy's UA11 to test with. Are > > these available? > > > > Yes, they are still available (along with KM11s) > > TTFN – Guy > ------ > I soldered my two KM11’s last Sunday! > I bought them from you at least eight years ago! > > Going to put them to good use solving issues in my 11/10 and 11/40 … > > BTW, my 11/35 booted from RL02. But at the moment the 11/35 has issues ☹ > Regarding an SLU in slot 9: AFAIR, the M7800 does not use nor connect NPR, > So the M7800 will go well in slot 9 regardless of BG and NPR present or > not. > > Please advise the order form/whatever to read about and if applicable order a UA11, thanks BTW - I put a 7800 (9600b) in my 11/40 in slot 9, works. I usually have the serial card in my 11DD-B backplane, slot 1. b
