> On Nov 21, 2016, at 2:13 PM, william degnan <billdeg...@gmail.com> wrote: > > On Mon, Nov 21, 2016 at 2:37 PM, Josh Dersch <dersc...@gmail.com> wrote: > >> Hi all -- >> >> I'm finally turning my attention back to my 11/40 (which I started working >> on 7 years ago and never quite got around to finishing -- I've learned a >> lot since then and I'm hoping to be able to debug it properly now). >> >> My ultimate goal is to run V6 or V7 UNIX on it -- I have the MMU but I'm >> looking for an M787 (line-time clock) and M7237 (stack limit register) to >> complete the set. I have other DEC stuff for trade, drop me a line... >> >> Thanks! >> Josh >> > > Just curious, are you aware whether these two are required to boot a RL02 > disk or certain versions of RT-11? I have been experiencing difficulties, > I only have the m737 iinstalled in my system. > Bill
RT11 will run w/o an LTC. TTBOMR the stack limit register is not need for Single Job and the other RT11 OS variants. However a program could overwrite the vector area and cause an ungraceful shutdown. Make sure the jumpers on the KD11-A are set correctly for this configuration. Using an RL02 to boot RT11 should be okay as well. Jerry j...@ieee.org
