This is great! Thanks Mattis, Jonas and Al. Somewhere I have an early DNIX system image from a development machine. I don't know if that is interesting to put on bitsavers as well?
/P On Thu, Nov 17, 2016 at 10:59:29AM -0800, Al Kossow wrote: > I've uploaded them to bitsavers.org/bits/DIAB > > I should get my Colex 68K unix bits pulled together > It was a VME 80186 MSDOS system that had a 68000/68451 board grafted onto it > to run Unisoft Unix > > On 11/17/16 10:52 AM, Mattis Lind wrote: > > A guy in Sweden made the effort to image the install media for DNIX 5.3 and > > 5.12 as well as ABCenix 5.12. > > > > https://dl.dropboxusercontent.com/u/96935524/Datormusuem/dnix-imd.tar.bz2 > > https://dl.dropboxusercontent.com/u/96935524/Datormusuem/ABCnix.tar.bz2 > > > > > > These are for computers made by DIAB (later part of Bull) DS90 and Luxor > > ABC1600 (branded Luxor but developed by DIAB). > > > > https://en.wikipedia.org/wiki/Dataindustrier_AB > > https://en.wikipedia.org/wiki/ABC_1600 > > > > They all were 68k based. The early DS90 had 68010 + 68451 MMU. The ABC1600 > > had 68008 and some homebuilt MMU. The ABC1600 > > is quite a nice machine with 768x1024 b/w portrait screen that can be > > twisted into landscape. It has a simple windowing > > system. Actually half of the hardware that make up the system is the > > graphics board. Unfortunately the 68008 makes it > > quite weak. > > > > I hope that the imaged disk can end up in a safer place than my dropbox, > > for example Bitsavers... > > > > Thanks Jonas Malm for doing the disk images (I am just the messanger)! > > > > /Mattis >
