> > > > As a follow up, I did end up purchasing the thing, in order to get the > prerequisite Altos 8200 system board and hard disk controller to mate > with my existing Altos disk. (My disk is the larger sized SA-4008, > contrary to the 1004 I cited earlier). It is indeed a 8000-10 system, > with a Z80 processor. > > It is an all-in one unit - the SA-1004 is on the right hand side of the > case, under the system board, and the floppy on the left side. Thus > quite heavy (shipping weight was apparently 72 lbs). I have not yet > disassembled it to check to see if the scrape on the transformer > requires further attention, to deal with the filter capacitors, remove > the useless SA-1004, etc. > > So, if anyone needs SA-1004 electronics or other pieces/parts let me > know. :) > > JRJ >
Did I send you this link? http://vintagecomputer.net/altos/8000/Altos-8000-pt2_8500_board.pdf I have the 8000 manual, someone had in the past ask me to scan this part of it. b
