Pete, I think I might have a few Kinetic CAMAC brochures and user manuals. I'll have to dig around but if you don't have another source, maybe I can scan them. We had a 2 large crates in our testing lab that I kick myself for not taking. I had no use for them but it's still some interesting hardware. We had a couple of old IBM XTs interfaced to them.
Regards, Brian. On Mon, Oct 31, 2016 at 2:04 PM, Pete Lancashire <p...@petelancashire.com> wrote: > Over the years I've played around with a few old CAMAC (*) modules, by > today's standard they pretty much have zero value, anyway that's another > story. Recently > I've been offered a CAMAC to Unibus board. A Kinetic 3912 Unibus Crate > Controller . > A Crate in CAMAC speak is just a chassis with a backplane. > > The problem with CAMAC is there is almost no information out there, > > Since I don't YET have a Unibus system, it more of a curiosity then > anything. > > So .. anyone have the manual ? > > (*) - > https://en.wikipedia.org/wiki/Computer_Automated_Measurement_and_Control >