An M930 terminator in the far left slot in A/B, where you have the RL11 (M7762). I don't remember if the G7273 is a unibus or q-bus grant card. I always use the G727 , I think, the little 2 inch by 2 inch or so.
Try front panel funstions with the RL11 out. You'll probably have to move it to slot 3. There is a trick to using a M9301 or m9312 in an 11/40, but I don't remember it now. It's been a while since since I've played with an 11/40. On Sun, May 22, 2016 at 6:07 PM, william degnan <billdeg...@gmail.com> wrote: > Paul, > What terminator card exactly? As I had written originally, the system was > functional before I added the core planes. I was thinking that I needed a > terminator now that I have more than just the cpu plus four slot plane, but > I did not have the space for it along with all of the cards I already have > installed. > > > http://vintagecomputer.net/digital/pdp11-40/card-layout_moved-plane_Pic2.JPG > (I removed the grant cards from the core planes per Tony's suggestion.) > > > -- > @ BillDeg: > Web: vintagecomputer.net > Twitter: @billdeg <https://twitter.com/billdeg> > Youtube: @billdeg <https://www.youtube.com/user/billdeg> > Unauthorized Bio <http://www.vintagecomputer.net/readme.cfm> >
