> -----Original Message----- > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Dave > Wade > Sent: 25 March 2016 12:16 > To: General Discussion: On-Topic and Off-Topic Posts > <cctalk@classiccmp.org> > Subject: Re: Olivetti M24 Mounting Bushes for Bus Converter > > Could they be 3d printed? Pictures might help...
There are actually two varieties. The plastic ones probably could, but actually I was talking about the steel ones which probably can't. I have put it all away again for now so I can't get any pictures right now. I'll get it out again later, if I can, and post some pics. Regards Rob > On 25 Mar 2016 09:20, "Robert Jarratt" <robert.jarr...@ntlworld.com> wrote: > > > The M24 I got the other day has the bus converter, whereas the other > > M24 that I already had does not. I bought a bus converter for the > > "old" one, but then realised I didn't have any mounting bushes or > > spacers in order to install it. I thought of removing some of the > > bushes from the new one to share with the old one, it wouldn't be as > > good but at least I would be able to install the converter. > > > > > > > > It looks like I might need some kind of special tool to remove the > > bushes from the new machine. Is there a way to do this with ordinary > > tools? Does anyone know if the mounting bushes are any kind of > > standard part that could still be bought somewhere? > > > > > > > > Thanks > > > > > > > > Rob > > > >
