On Fri, Mar 11, 2016 at 9:02 PM, jwsmobile <j...@jwsss.com> wrote: > > > On 3/11/2016 8:51 PM, Zane Healy wrote: > >> On Mar 11, 2016, at 6:22 AM, Kevin Monceaux <ke...@rawfeddogs.net> wrote: >>> >>> OI hadn't checked on Multics progress in quite a while. Yesterday I >>> discovered that the DPS-8/M emulator at: >>> >>> https://SourceForge.net/projects/dps8m/ >>> >>> is far enough along to boot Multics. I thought some folks on this list >>> might be interested in it. >>> >> What I’d like to know is if any copies of GCOS-8 exist in the wild. >> That’s what I’d personally really like to boot on the emulator. I used to >> be able configure all the IOP’s, IOM’s, CPU’s, etc. from memory, power them >> up, and boot GCOS-8. >> >> Zane >> > The problem with GCOS is that there isn't a history I know of that it was > anything but Honeywells property. A lot of negotiation and persistence on > the part of many folks went to getting it to where the Multics code could > be released. And it was lucky to be saved @ MIT and the CHM with > donations. > > I don't know of anyone with GCOS when it has been mentioned over the > history of the discussions about this hardware. > > Many thanks to Harry and Charles for writing the emulator, and to the > others reviving the system. > > I plan to have a 6180 panel at VCF West and an original 645 board from the > first Multics system for show and tell. > > thanks > Jim > > I was tentatively planning to be at VCF West with a Multics emulation, and as much real hardware as I can chase down (I/O selectric OPCON, maybe a tape drive, a line printer, ?)
Maybe we can hook up a beaglebone to your 6180 panel? -- Charles
