supply a picture if you can On 1/6/2016 10:52 AM, Bill Sudbrink wrote: > Hi all, > > I am in the process of restoring/recreating a linear > PS as part of a project and I would like to use the > original parts if possible. I'm looking for six > Mallory axial electrolytic capacitors. The physical > dimensions are 11mm in diameter by 44mm in length. > They have a clear plastic wrap, so the aluminum > silver color shows through. The printing on them > goes around the circumference (not end to end) and > reads: > > +-M-+ > 2000 MF 10 V > 20-48923 > > Electrically, they are (were) 2000uf, 10 volt. My > bet is that these are mil-spec versions of Mallory's > TT10X2000 capacitor. They physically match some > Mallory TT15X1000 caps that I have in my parts box. > I've been "beating the bushes" for a while now with > no luck on the "20-48923" part number. I've also > contacted all of the web site owners that claim to > have TT10X2000s. They have all come back with "well, > we don't actually seem to have that part after all". > > If anyone has either of the above, I'll pay a good > price for them. They don't have to be in operational > condition electronically, I'll "restuff" them if > necessary. > > Thanks, > Bill Sudbrink > > >
-- The contents of this e-mail and any attachments are intended solely for the use of the named addressee(s) and may contain confidential and/or privileged information. Any unauthorized use, copying, disclosure, or distribution of the contents of this e-mail is strictly prohibited by the sender and may be unlawful. If you are not the intended recipient, please notify the sender immediately and delete this e-mail.
