Surely there is a copy of CalComp Host Computer Basic Software (HCBS) around somewhere that talks to the XY11. After all the Calcomp is pretty thick. All it can do is move 1 step at once, well it can do diagonals as well, but pretty thick...
Dave G4UGM > -----Original Message----- > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Stefan > Skoglund (lokal användare) > Sent: 23 December 2015 11:07 > To: cctalk@classiccmp.org > Subject: Re: XY11 Manual, Anyone? > > > > > Then for software I found a diagnostic, XXYAD0 that supposedly > > > should draw a square and a rectangle. > > > > > > Anyone know of other drawing software that uses the XY11 > > > > > > /Mattis > > > > The book 'The Minicomputer in the Laboratory' by James W Cooper covers > > using an X-Y plotter with an 11/05, and has assembly listings and a > > whole bunch of related stuff about scientific plotting. Also a lot of > > info on using the LPS- > > 11 too. > > There are plenty of copies out there and quite cheap too. It's an > > excellent book and could be of use to you. > > > > Steve. > > > > Boken finns i Umeå universitets boksamling (även på > fysikinstitutionen.) > Det verkar inte finnas något exemplar i Uppsala däremot. :-) Kastad ?