So I saw this NCR376 card punch on the German Ebay and placed a bid, getting it for Eur 1.50 (approx $1.75).
Last Saturday I picked it up near Frankfurt and brought it back home and came with a small user manual (in German), 2 sheets of diagrams (need to find a magnifier to read it properly) and about 500 unused cards. There are a few small issues, the rubber rollers of the feeder are melted, but apparently can be replaced using some heat shrink tube, the rubber layer seems to be very thin. Another issue are the transport rollers which moves the card from right to left where the hopper is. Those are also melted but again seem to be repairable. Last issue is that when I press some keys on the keyboard, the card does not advance, only some clicking noises from the backplane is heard. The backplane consists of s series of relays on a few cards, and a number of capacitors on a few other cards. (Yes, this card punch is driven by a series of relays). This unit is OEM-ed from JUKI (Juki-1300), a Japanese company who made it. Although the machine is small (about 100 x 100 x 45 cm) is weights 100Kg. Anybody know a source for other manuals of this machine? Googling for it did not return much for it. Ed -- Ik email, dus ik besta. BTC : 1J5fajt8ptyZ2V1YURj3YJZhe5j3fJVSHN LTC : LP2WuEmYPbpWUBqMFGJfdm7pdHEW7fKvDz