> Thanks .. > That helps. > > 1. The hub measures about 11mm so I should be able to get a 10mm > bore hose on (warm it up a bit might help) . Yep. > 2. What type of glue is best? I use 2k but in the past I used PU-glue, both works fine.
> 3. You can see how thick the old one was but yours seems a little bigger? It's important the tape cassette presses both switches but doesn't reach the bulkhead (right name?). The tape cassette is spring loaded and needs a little room to move (<1mm). Put an tape without cover (just the ground plate) in the drive and you can measure the distance between the drive wheel and the capstan ad a little (about 1mm or less) and got the thickness of the rubber. There is enough tolerance in the electronics, so you have room to experiment. > 4. From what I have seen on the list the actual outer diameter is > 0.625 inches. I calculate that as 15.9 mm, looks good to me. -Rik