Hi all - As noted in a mail last week, I now have my PDP-11/05 running with working core (8KW). I had some time last night to try loading in some "real" software, and I started with the PDP-11 paper-tape BASIC, which I've successfully loaded into memory (in theory). At this point, it became clear that there's still an issue or two to iron out in the CPU; BASIC behaves extremely erratically, spewing random error messages, listing garbage, and corrupting itself and crashing pretty quickly.
I'd run the memory exerciser MAINDECs previously (and I ran them again for good measure) and there are no obvious issues with the memory. The system exerciser diagnostic (ZQKB) passes, but the "11 family instruction exerciser" (ZQKC) fails after a minute or so at PC=016014. I have the listing for the diagnostic (though I'm not precisely sure whether it's exactly the same revision) from here: http://bitsavers.trailing-edge.com/pdf/dec/pdp11/xxdp/diag_listings/MAINDEC-11-DZQKC-C-D_11_Family_Instruction_Exerciser_Nov73.pdf The doc is pretty grainy but the code at 016012 doesn't actually seem to match what I've got in memory (I disabled relocation in the test just to be sure things didn't get moved around) and there's no failure check at that particular point in memory either. I've tried the paper-tape images from Bitsavers as well as the ones on the XXDP RL02 images floating around out there and they all yield the same results; I suppose it's possible the CPU is failing in such a way as to make the test reporting incorrect but it seems more likely that (a) I have an outdated listing or (b) I'm misinterpreting the results somehow. Anyone have any experience with this particular diagnostic? Thanks, Josh
