On Mon, 2 Nov 2015, Christian Corti wrote:
I wish it were true in my case. I don't even get it running under SIMH.
Is it possible that the error is because of the monitor not seeing the QD32?
At least if I netboot NetBSD it doesn't see the QD32 either, only the RQDX3.
[...]
Playing a bit with the QD32 I've found out that it has the "big" EPROM,
i.e. the 27256 32kB ROM, and this one *includes* the diagnostic routines.
So there are the instructions how to enter the built-in routines:
U
I
D/P/W 20001F40 20
D/P/L 20088000 80000000
D/P/L 20088004 80000001
D/P/W 200000EC 1
D/P/W 200000EE 3003
D * 4401
S 80
And here we go:
Firmware-Resident Diagnostic
Copyright (c) 1988 Emulex Corporation all rights reserved
QD32 controller, firmware revision level K
IP address = 160354
Option menu
1 - Self Test Loop
2 - Format
3 - Verify
4 - Format and Verify
5 - Data Reliability Test
6 - Format, Verify, and Data Reliability Test
7 - Read Only Test
8 - List Known Units
9 - Replace Block
10 - Display Novram
11 - Edit / Load Novram
Enter option number:
Christian
