Well I guess you could use it for many things. It looks like one paper tape reader or perhaps punch, I think there are 60 lamp drivers, a few AND gates, lots of OR gates. A counter. Delay circuits and memories. So a Trainer is possible...
Dave G4UGM > -----Original Message----- > From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Nick Allen > Sent: 29 October 2015 22:44 > To: cctalk@classiccmp.org > Subject: Re: Massey Dickinson - help identify > > here are some close up photos: > > https://goo.gl/photos/1hxkfkei4jKoWXtP8 > > https://goo.gl/photos/jhaqLndqbkqX4kV68 > > https://goo.gl/photos/dmZVBV3gwGJqSZK58 > > https://goo.gl/photos/sKJorbim7eRTsdVQ8 > > https://goo.gl/photos/sy6UcUCCPnRHB4ic8 > > On 10/29/2015 5:28 PM, Nick Allen wrote: > > Looking for help identifying these 2 pieces of Massey Dickinson > > equipment. > > > > I was told this machine is a trainer of sorts, but have my doubts: > > https://goo.gl/photos/ktBMTiYXxLZd8dH1A > > > > But per the research I have done, the only reference of Massey > > Dickinson and PDP8s are for Data Acquisition, I assume that is what > > this machine is for (was interfaced to a PDP8i): > > https://goo.gl/photos/cqwTHmb6QhGKfgwy9 > > > > Thanks everyone! > > > > -Nick > > > >
