>>> B/1 DIA0: SYSBOOT> CONTINUE
On Tue, Sep 1, 2015 at 4:13 PM, Kyle Owen <kylevo...@gmail.com> wrote: > I can boot to VAX/VMS 5.4-2, but on startup, I see this message: > > %DCL-E-OPENIN, error opening DUB0:[RS1R4]RS1LOG.COM; as input > -RMS-E-DNR, device not ready, not mounted, or unavailable > %DCL-E-OPENIN, error opening DUB0:[ORACLES]ORAUSER.COM; as input > -RMS-E-DNR, device not ready, not mounted, or unavailable > %DCL-E-OPENIN, error opening DUB0:[ECMS4]LOGIN.COM; as input > -RMS-E-DNR, device not ready, not mounted, or unavailable > > Okay, so DUB0: isn't mounted, I guess. > > ROHIT1$ show dev > > Device Device Error Volume Free > Trans Mnt > Name Status Count Label Blocks > Count Cnt > R7CY2A$DIA0: Mounted 0 VMS54_2DISK 173289 > 134 1 > ROHIT1$DUB0: Online 0 > ROHIT1$DUB1: Online 0 > ROHIT1$DUC10: Online 0 > > Device Device Error Volume Free > Trans Mnt > Name Status Count Label Blocks > Count Cnt > ROHIT1$MUA0: Online 0 > > Device Device Error > Name Status Count > FTA0: Offline 0 > OPA0: Online 0 > TWA0: Offline 0 > > Device Device Error > Name Status Count > IKA0: Offline 0 > IMA0: Offline 0 > INA0: Offline 0 > PTA0: Online 1 > PUA0: Online 1 > PUB0: Online 2 > PUC0: Online 2 > PYA0: Offline 0 > SJA0: Online 0 > SJA1: Online 0 > WSA0: Offline 0 > XQA0: Online 0 > > Looks like they're online but not mounted. If I'm reading the help pages > correctly, I should just be able to mount it at this point: > > ROHIT1$ mount dub0: disk0 > %MOUNT-F-INCVOLLABEL, incorrect volume label > -MOUNT-I-VOLIDENT, label = 'USER01 ', owner = ' ', format = > 'DEC > FILE11B ' > > I tried giving it the correct label, but it still didn't seem to mount. Now > I wanted to see if the MSCP server is running: > > ROHIT1$ show device/served > MSCP-Served Devices on ROHIT1 1-SEP-2015 10:55:19.39 > > Queue Requests > Device: Status Total Size Current Max Hosts > %SHOW-E-MSCPNOTLD, MSCP-Server code not loaded > > No, it doesn't look like it...so getting back to the >>> prompt, I do a bit > more investigation: > > >>>show dev > UQSSP Disk Controller 0 (772150) > -DUA0 (RF71) > > UQSSP Disk Controller 1 (760334) > -DUB0 (RA81) > -DUB1 (RA81) > > UQSSP Disk Controller 2 (760340) > -DUC10 (RA81) > > UQSSP Tape Controller 0 (774500) > -MUA0 (TK70) > > Ethernet Adapter 0 (774440) > -XQA0 (08-00-2B-17-3F-37) > > I should be able to get to the PARAMS> prompt now: > > >>>set host /dup/uqssp/disk 1 params > Starting DUP server... > > UQSSP Disk Controller 1 (760334) > > Stopping DUP server... > >>> > > Or not? Why can't I seem to get to the prompt? I can with disk 0: > > >>>set host /dup/uqssp/disk 0 params > Starting DUP server... > > UQSSP Disk Controller 0 (772150) > Copyright 1988 Digital Equipment Corporation > > PARAMS> show allclass > > Parameter Current Default Type Radix > --------- ---------------- ---------------- -------- ----- > ALLCLASS 0 0 Byte Dec B > > PARAMS> > > Can't seem to get to PARAMS> with disk 2 or tape 0 either. Only disk 0 > seems to work. > > Can anyone provide any suggestions? I'd like to see what else is on the > system. Pictures here: http://imgur.com/a/WYGra > > Thanks, > > Kyle > -- Bill vintagecomputer.net
