Thanks Jay, I'll try to figure out it the non listed are typos or newer boards.
On Thu, Aug 13, 2015 at 10:26 AM, Jay Jaeger <cu...@charter.net> wrote: > I turned the list into a CSV, based on M7... assumption, using the list at > > > http://bitsavers.org/pdf/dec/modules/modulesAndOptions/editedOptionModuleLst_Apr83.pdf > > M700/M70/M7,qty,From editedOptionModuleLst_Apr83.pdf > > 0,,VT05 Cursor > 13,,VT40 (?) vector/char gen > 14,,VT40 (?) boot/term > 24,,VT55 Graph. Ctl > 25,,KW11-K Dual programmable clock (LDP) > 26,,???? Not listed > 27,,???? Not Listed > 86,,PTV11-E Control > 92,11,PDP-11/44 KE44-A CIS Data Path/Logic > 94,2,PDP-11/44 KD11-Z Data Path > 95,,PDP-11/44 KD11-Z Control > 96,,PDP-11/44 KD11-Z Multifunction Module > 98,,PDP-11/44 KD11-Z Unibus > 110,,DS11 Synch. Modem interface > 122,3,RT801 FDC Microprocessor Controller > 123,,RT805 FDC Serial Line Interface > 127,3,RT800 FDC Serial Bus Port > 128,2,???? Not Listed > 135,,???? Not Listed > 136,,???? Not Listed > 147,2,M7808 (M7247 + M7246) W/ Synchronized Scanner (DM11) > 164,13,???? Not Listed > 165,14,???? Not Listed > 168,2,???? Not Listed > 196,6,TSV05 Controller > 211,,KE11-A Register Control (PDP-11/20 Extended Arithmetic Element) > 219,2,RC11 Bus Interface > 228,5,KW11-P Programmable RTC > 232,4,PDP-11/40 KD11-A uWord > 244,,DM11 Transmitter > 251,12,XOR & CRC Block KG11-A > 254,6,RK11-D Status Control > 255,6,"RK11-D Disk Control [NOTE: If -YA, modified for Diablo Series 30]" > 256,3,RK11-D Registers > 257,5,RD11-D Bus Control > 258,12,LP11/LS11 Interface > 259,,Parity for MF11-LP > 260,,PDP-11/05 KD11-B Data Paths > 264,19,PDP-11/03 Processor w 4K RAM > 268,,RKV11-D Qbus > 280,2,"8 UARTS on Quad, DJ11" > 410,3,???? Not Listed > 454,8,???? Not Listed > 485,2,UDA50-A Unibus to Radial Disk w/No ROMS > 500,,PDP-11/23 Qual Serial Line Qbus Interface > 507,2,???? Not Listed > 508,,???? Not Listed > 509,,???? Not Listed > 510,,???? Not Listed > 521,,???? Not Listed > 546,2,???? Not Listed > 547,2,???? Not Listed > 551,6,???? Not Listed > 552,2,???? Not Listed > 554,5,???? Not Listed > 555,4,???? Not Listed > 556,4,???? Not Listed > 577,,???? Not Listed > 602,6,???? Not Listed > 605,2,???? Not Listed > 606,,???? Not Listed > 608,13,???? Not Listed > 609,9,???? Not Listed > 620,7,???? Not Listed > 621,24,???? Not Listed > 622,25,???? Not Listed > 624,5,???? Not Listed > 625,2,???? Not Listed > 626,3,???? Not Listed > 637,,???? Not Listed > 639,2,???? Not Listed > 677,7,???? Not Listed > 706,2,RK06 Interface & Timing > 744,20,RX02 Control > 745,14,RX02 Read/Write > 765,15,???? Not Listed > 769,10,???? Not Listed > 772,3,RP04 Synchronous Logic > 773,3,RP04 Asynchronous Logic > 774,4,RP04 Register Logic > 775,2,RP04 Dual Port Logic > 776,4,RP04 Error Correction Logic > 787,,RP05/6 Interfqace Control > 793,,DEUNA Link Module (M7792 to Ethernet Bus Line Unit) > 800,32,"Asynch Transmitter/Receiver, KL11 (Various submodels exist)" > 803,,Arbitration Control for MC11 > 807,2,"M7247, M105, M7821 on One Quad, EIA Only (DM11)" > 810,6,M781 + M105 + M7821 on one Quad (Paper Tape Interface) > 814,3,"8-Line 20MA Data Mux, 50 to 100K Baud DZ11-C, DZ11-D, DZ11-F" > 819,3,DZ11-A 8 Line Dbl Buf Async EIA 50 to 96 Kbaud W 103A Modem Control > 821,,Fast M7280 (Interrupt Control) > 822,12,DU11 > 846,2,RX01 UNIBUS Interface > 847,22,MS11 Memory (Various Submodels exist) > 850,15,"MM11-BP, MM111-CP Parity Board for G651, MS-11-?P" > 856,14,"DL11-W, SLU/RTC Option" > 859,2,PDP-11/34 KY11-LB Console Interface (8008 CPU) > 860,4,DR11-C = M786+M105+M7821 > 864,,DR11-L 2 Word UNIBUS Input Interface > 867,,DUP11-DA SDLC or DDCMP Sync Interface > 876,,PDP-11/60 KD11-K Timing > 891,,MS11-L? (Varous Submodels Exist) > 893,3,"DRS11, 48 outputs (Various submodels exist: TTL, Open Collector)" > 894,,"DRS11, 48 Optical Isolated Outputs" > 896,,"DRS11 48 Contact Sense Inputs (Submodels exist - 24V, 48V)" > 903,,RK611 Data > 904,,RK611 Drive Interface > 908,,RK07 Track Position Detector > 910,,M791+M105_M7821 Parallel Interface to LA30P > 911,,"TMB11 Tabe Control 1, Hex" > 921,,MA11-F Data Multiplexor > 922,,MA11-F Address Multiplexor > 923,,MA11-F Mux Control > 930,2,M793+M105+M7821 Interface to Data Products line printers > 944,2,MSV11-B 4K 16 Bit MOS > 946,5,RXV11 Control > 950,3,DRV11-B DMA 16 Bit Parallel Interface > 951,2,DUV11-DA Sync Interface > 952,,"KWV11-A LSI11 Bus, Programmable RTC" > 955,3,MSV11-?D (Various Submodels Exist) > 957,33,"DZV11, 4 Line Dlb Buf Async Mux EIA 50 - 10 K Baud W 103 Modem > Control" > 958,,Q-Bus to I/O Daisy Chain Bus Control & Interface > 982,,TS11 UNIBUS to Serial Bus Controller > 983,2,MFS11-K Family Control > 991,2,PCL11-B TXM (Transmitter) Interface > 992,2,PCL11-B TXM UNIBUS Control > 993,2,PCL11-B TXM Registers > 994,2,PCL11-B TDM Bus Logic * Drivers > 995,2,PCL11-B RCV (Receiver) Registers > 996,2,PCL11-B RCV UNIBUS Control > 997,2,"PCL11-B RCV Interface," > > > > On 8/13/2015 2:57 AM, Paul Anderson wrote: > > Hi Pontus, > > > > No, you probably didn't miss anything. I have several students working > for > > me and they don't always get it. Sorry, I'll try to correct it next week. > > > > Thanks, Paul > > > > On Thu, Aug 13, 2015 at 1:38 AM, Pontus Pihlgren <pon...@update.uu.se> > > wrote: > > > >> Hi > >> > >> Many interesting boards. I tried to identify them with the field guide: > >> http://world.std.com/~mbg/pdp11-field-guide.txt > >> > >> But many numbers didn't exist there. For instance M7765 of which you > >> have 15. > >> > >> Have I missed something? > >> > >> /P > >> > >> On Thu, Aug 13, 2015 at 12:42:53AM -0500, Paul Anderson wrote: > >>> Sorry, this wasn't done the way i wanted. for the 2 digit numbers > place > >> a > >>> 70 in front, for the rest , just put a M7 in front. > >>> > >>> > >>> On Thu, Aug 13, 2015 at 12:33 AM, Paul Anderson <used...@gmail.com> > >> wrote: > >>> > >>>> This might work better > >>>> > >>>> > >>>> > >> > https://drive.google.com/file/d/0B2MOaRm-6XKNV3hENS1Hd1lURXc/view?usp=sharing > >>>> > >>>> On Wed, Aug 12, 2015 at 11:58 PM, jwsmobile <j...@jwsss.com> wrote: > >>>> > >>>>> > >>>>> > >>>>> On 8/12/2015 8:26 PM, Paul Anderson wrote: > >>>>> > >>>>>> Thanks Jay, > >>>>>> > >>>>>> I was afraid i messed in up.... > >>>>>> > >>>>>> On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cu...@charter.net> > >> wrote: > >>>>>> > >>>>>> When I visited this link, I ended up with a blank, white page. > >>>>>>> > >>>>>>> JRJ > >>>>>>> > >>>>>>> I get a blank page too, no action. Google drive shares don't leave > >>>>> much you can adjust to try to fix links. The entire link got thru > >> fine, > >>>>> but it isn't working. > >>>>> > >>>>> Maybe you need to make sure it is view, and public. > >>>>> > >>>>> thanks > >>>>> Jim > >>>>> > >>>>> > >>>> > >> > > >
