As Antonio mentioned, the condist VAXVMS073 normally boots into standalone
backup mode. The only application
that runs is BACKUP.
if you boot
>>>b/r5:10000000 dka700:
(BOOT/R5:10000000 DKA700:)
You get a bit more capability to handle disks. You can mount the disks and
verify they are accessbile. If you
use dump, specify reasonable start and end blocks as interrupts don’t work (!)
$set noverify
Installing required known files...
Configuring devices...
System time is: 26-JUL-2015 00:11:19.97
Enter Yes to the next question to leave the system time unchanged
(the system clock continues to run unaffected)
Enter No to set a new system time
Enter ? to redisplay the time
* Is this correct? (Y/N/?) y
********************************************************************
You can execute DCL commands and procedures for various "standalone"
tasks, such as backing up the system disk.
Please choose one of the following:
1) Execute DCL commands and procedures
2) Shut down this system
Enter CHOICE or "?" to repeat menu: (1/2/?) 1
WARNING --
The normal OpenVMS startup procedure has not executed.
Some commands and utilities will not work as documented.
COMPAQ does not support PRODUCT INSTALL and other
PRODUCT operations in this environment.
Enter DCL commands -- Enter "LOGOUT" when done.
When you enter "LOGOUT" a logout message will be displayed,
and you will be returned to the menu.
$$$
Note the different prompt.
$$$ mount/fore dka400:
%MOUNT-I-MOUNTED, HD1025 mounted on _DKA400:
$$$ sh dev dka400:/full
Disk DKA400:, device type SEAGATE ST15230N, is online, allocated, deallocate on
dismount, mounted foreign, file-oriented device, shareable, error logging is
enabled.
Error count 0 Operations completed 5
Owner process "STARTUP" Owner UIC [1,4]
Owner process ID 00000023 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 2 Default buffer size 512
Total blocks 8386733 Sectors per track 111
Total cylinders 3977 Tracks per cylinder 19
Volume label "HD1025" Relative volume number 0
Cluster size 0 Transaction count 1
Free blocks 0 Maximum files allowed 0
Extend quantity 0 Mount count 1
Mount status Process ACP process name ""
Volume Status: Unknown ACP type.
$$$
> On Aug 7, 2015, at 1:04 PM, Holm Tiffe <h...@freibergnet.de> wrote:
>
> Jerry Weiss wrote:
>
>> Having the CDROM write protected is normal for read-only media. The
>> target drive needs to be write enabled. Before you boot the CD, list the
>> disks you have.
>
> Yes, it's vnormal that the CDR is ro..
>
> I have the following devices:
>
> du3 .. CDROM
> and DISK0$DIA0 (RF31)
> and DISK1$DIA1 (RF31)
> and DISK2$DIA2 (RF71)
>>
>>>>> sh device
>>
>> Choose a disk that is unused/empty.
>>
>> Once you get the $ or $$$ prompt, you need to restore the save from the
>> CDROM to your target disk using BACKUP.
>>
>> My installation looked like this. DKA700 is the VAXVMS073 CDROM. DKA0: is
>> the unused disk. Both disks are on the SCSI bus.
>>
>> During the restore, control-T shows the progress.
>> Once I finished the restore of the OS to the new disk, booting from that
>> disk automatically starts the rest of the install process.
>>
>> ------------
>>
>> $$$ backup/image/verify dka700:vms073.b/save dka0:
>> Restoring file: DKA0:[VMS$COMMON.SYS$LDR]FYDRIVER.EXE;1
>> Saveset volume:1, saveset block:71 (32256 byte blocks)
>> Restoring file: DKA0:[VMS$COMMON.SYS$LDR]SYSLOA1302.EXE;1
>> Saveset volume:1, saveset block:143 (32256 byte blocks)
>> Restoring file: DKA0:[VMS$COMMON.SYSMSG]CLIUTLMSG.EXE;1
>> Saveset volume:1, saveset block:1260 (32256 byte blocks)
>> %BACKUP-I-STARTVERIFY, starting verification pass
>> $$$ log
>
>
> I've booted the CD w/o any bootflag in R5 to the $ prompt.
> , it asks for the date/time and displays the devices like above
> (DISK0$DIA0 but DU3) and asks if that list is correct, yes it is.
> After that I've issued:
>
> $ backup/image/verify dua3:vms073.b/save disk0$dia0:
> (dia0 only doesn't work)
>
> I've get a long list about many files (from the cdrom)
> and SYSTEM-F-VOLINF, volume is not software enabled
>
>
> A while ago I've reformated an tested the 3 DSS
> I disks with the firmware on them, the disks are all empty.
> I think here is a step missing, Do I have to initialize them first?
> The disks are ok, the veryfy programs on them saying that....
>
> Regards,
>
> Holm
> --
> Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
> Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
> www.tsht.de, i...@tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
>
