what about boards with 400 plus pots on it and sliders? On Sat, Jun 13, 2015 at 11:56 PM, wulfman <wulf...@wulfman.com> wrote:
> nothing like running them through the dishwasher with hot water and good > soap. > I repair old arcade boards and i have found nothing better. > after they are hot from the wash you blow them off with compressed air > till try > and leave them in a rack in case you missed any water. > as long as they dry fast there will be no chance of damage. > on the off chance there is a component that must not get wet > you can remove it and re solder it once clean > this method removes all manor of issues from tobbaco smoke residue to > mouse poops and pees. > once clean if there is any corroded areas they can be repaired. > > > > On 6/13/2015 8:16 PM, Adrian Stoness wrote: > > has anyone experimented with this on parts? when dealing with dirty > > equipment? > > if so what works best for liquid sulutions? > > > > ive got a shelf of 15in bass drivers.... and some amps thinking of > building > > something to clean some audio boards i aquired on the cheap though maybe > > some folks here would have some ideas? > > > > > -- > The contents of this e-mail and any attachments are intended solely for > the use of the named > addressee(s) and may contain confidential and/or privileged information. > Any unauthorized use, > copying, disclosure, or distribution of the contents of this e-mail is > strictly prohibited by > the sender and may be unlawful. If you are not the intended recipient, > please notify the sender > immediately and delete this e-mail. > >
