be aware there was a DEC terminal plant here in phx az late 70s early 80s Ed Sharpe archivist for SMECC _www.smecc.org_ (http://www.smecc.org) In a message dated 5/19/2015 9:53:59 P.M. US Mountain Standard Time, ddsny...@zoominternet.net writes:
The serial number can be broken into 3 areas... The first two digits indicate the country of Manufacture AY = Ayr, Scotland BK = Germany GA = Galway, Ireland IQ = Somewhere else NI = Salem, New Hampshire, USA PC = Irvine, Scotland KA = Kanata, Ontario, Canada CX = Colorado Springs, CO, USA WF = Westfield, MA, USA AB = Albuquerque, NM, USA The 3rd Digit indicates the year 7 = 1997 8 = 1998 9 = 1999 etc. The 4th & 5th digits indicate the week of manufacture from January. 01 = 1st week in January 12 = 12th week after January 1st (End of March) 20 = Mid April For a rough calculate take 4 weeks to the month The remaining digits indicate the run number. 00005 = The 5th one made at this plant 00100 = The 100th one made at this plant >From the fog in my head... Dan Snyder, Butler, PA ----- Original Message ----- From: "Jack Rubin" <j...@ckrubin.us> To: <cctalk@classiccmp.org> Sent: Friday, May 01, 2015 5:25 PM Subject: Place of manufacture for DEC equipment? Is there a way to identify which DEC plant manufactured a specific piece of equipment? I'm certainly aware of the Maynard, Massachusetts label on my equipment and I'm pretty sure I've seen DEC Kanata, Canada on flipchip handles. Maybe even PR serial numbers on computers built in Puerto Rico. Can anyone supply any more extensive and/or detailed information? Thanks, Jack
