Havent checked the configs, but MPLS is up ? There should be a new LDP session between R2 and R8, can you check that
I will re-check your configs in an hour or so. CCIE # 23962 (SP) On Tue, Nov 2, 2010 at 9:08 AM, Gaurav Thukral <[email protected]>wrote: > Hi guys, > > I have the following diagram for L2TPv3 > > R4---------FR--------R8-----------------R2----------FR--------R3 > > R8 & R2 are PE and R4 & R3 are CE. > > I have done the following configuration on the devices. > > R8 & R2 > > pseudowire-class L2TPV3 > encapsulation l2tpv3 > ip local interface Loopback0 > > R4 > > interface Serial0/0 > ip address 5.5.34.4 255.255.255.0 > encapsulation frame-relay IETF > frame-relay map ip 5.5.34.3 408 broadcast > frame-relay lmi-type ansi > > R3 > > interface Serial0/0 > ip address 5.5.34.3 255.255.255.0 > encapsulation frame-relay IETF > frame-relay map ip 5.5.34.4 302 broadcast > frame-relay lmi-type ansi > > R8 > > frame-relay switching > > int s0/0 > encapsulation frame-relay IETF > frame-relay intf-type dce > frame-relay lmi-type ansi > frame-relay interface-dlci 804 switched > > > connect L2TP Serial0/0 804 l2transport > xconnect 5.5.2.2 28 pw-class L2TPV3 > > R2 > > frame-relay switching > > int s0/0 > encapsulation frame-relay IETF > frame-relay intf-type dce > frame-relay lmi-type ansi > frame-relay interface-dlci 203 switched > > connect L2TP Serial0/0 203 l2transport > xconnect 5.5.8.8 28 pw-class L2TPV3 > > The L2tpv3 is not comming Up & > > in sh ip int brief on the routes it is showing line protocol down. > > Please tell me where i have done the configuration mistake? > > Regards, > Gaurav > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
