Hi guys, I have the following diagram for L2TPv3
R4---------FR--------R8-----------------R2----------FR--------R3 R8 & R2 are PE and R4 & R3 are CE. I have done the following configuration on the devices. R8 & R2 pseudowire-class L2TPV3 encapsulation l2tpv3 ip local interface Loopback0 R4 interface Serial0/0 ip address 5.5.34.4 255.255.255.0 encapsulation frame-relay IETF frame-relay map ip 5.5.34.3 408 broadcast frame-relay lmi-type ansi R3 interface Serial0/0 ip address 5.5.34.3 255.255.255.0 encapsulation frame-relay IETF frame-relay map ip 5.5.34.4 302 broadcast frame-relay lmi-type ansi R8 frame-relay switching int s0/0 encapsulation frame-relay IETF frame-relay intf-type dce frame-relay lmi-type ansi frame-relay interface-dlci 804 switched connect L2TP Serial0/0 804 l2transport xconnect 5.5.2.2 28 pw-class L2TPV3 R2 frame-relay switching int s0/0 encapsulation frame-relay IETF frame-relay intf-type dce frame-relay lmi-type ansi frame-relay interface-dlci 203 switched connect L2TP Serial0/0 203 l2transport xconnect 5.5.8.8 28 pw-class L2TPV3 The L2tpv3 is not comming Up & in sh ip int brief on the routes it is showing line protocol down. Please tell me where i have done the configuration mistake? Regards, Gaurav
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
