Thanks Rick I am using dynamips now and L2TP is working fine
I'm facing problems with QPPB on both vRack and dynampis now, but I will try a couple of things and post the question later. The big day is coming... thanks once again... André On Thu, Oct 22, 2009 at 6:39 AM, Rick Mur <[email protected]> wrote: > Unfortunately the 7200s used on the ATM rack do NOT support any L2VPN. I > guess they are not VXR's. You can use the regular SP racks, which use > ISR's. They do support L2TPv3. They don't support AtoM, but the commands are > basically the same. > > To practice L2VPN on AToM and practice the interworking especially I would > use Dynamips. Use our 7200/ATM rack Dynamips topology for that. Than you'll > get VXR's which support all of the technology you need. > > -- > > Regards, > > Rick Mur > CCIE2 #21946 (R&S / Service Provider) > Sr. Support Engineer – IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> > > > 2009/10/19 Shaughn Smith <[email protected]> > >> As per my previous e-mail >> >> >> It is an IOS issue, use a later IOS and it should work >> >> CCIE # 23962 (SP) >> >> 2009/10/19 André Luiz Bernardes <[email protected]> >> >>> Hello all. I'am currently using proctor labs rack 7200/ATM to my >>> preparation for SP exam. I am using IPexpert workbooks as well others mini >>> scenarios using technologies not convered in deaph such as L2TPv3. I am very >>> frustrated that I couldn't simulate any scenario using l2tpv3 (pseudowire, >>> xconnect, etc) as any router on 7200/ATM rack accept l2tpv3 configuration >>> commands. I tried diferrent interface types (atm, eth, serial..) on all >>> routers and also checked CEF was enabled (pre-requisite). I checked IOS >>> features on Cisco website and it appears that AToM is support for versions >>> used on the rack. Is there any known issue here or am I missing something? >>> Example : Router 6 : >>> Cisco Internetwork Operating System Software >>> IOS (tm) 7200 Software (C7200-P-M), Version 12.2(18)S2, RELEASE SOFTWARE >>> (fc2) >>> >>> R6(config)#int s4/3 >>> R6(config-if)#xconnect ? >>> % Unrecognized command >>> R6(config)#pseudowire? >>> % Unrecognized command >>> Thanks in advance >>> Andre Vasquez >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
