If I change things up and use EIGRP RIP or OSPF it works just fine.   So I was 
thinking it was something with BGP.



From: Steve Di Bias [mailto:[email protected]]
Sent: Friday, February 01, 2013 6:48 PM
To: Bodnar, Edward
Cc: [email protected]
Subject: Re: [OSL | CCIE_RS] BGP PE - CE configuration



Make sure you are advertising the loopbacks on your CE's, do you see these in 
the routing table of the other CE's? Now try pinging again but source your 
packets from the loopback.



>From CE -"ping x.x.x.x source y.y.y.y"



If you are seeing the routes on your CE's that means the RT's are importing 
just fine. If that doesn't work we will dig deeper.







On Fri, Feb 1, 2013 at 2:24 PM, Bodnar, Edward 
<[email protected]<mailto:[email protected]>> wrote:

I can never seem to get this to work.  I can See routes end to end but I am 
missing something when I use BGP as the PE - CE protocol.  I thought BGP was 
supposed to be the easy one J





I have full connectivity.  And I can see routes Just can't ping.



RT4:

router bgp 1

no bgp default ipv4-unicast

bgp log-neighbor-changes

neighbor 1.1.1.1 remote-as 1

neighbor 1.1.1.1 update-source Loopback0

neighbor 10.10.45.5 remote-as 5

!

address-family ipv4

  neighbor 1.1.1.1 activate

  neighbor 10.10.45.5 activate

  no auto-summary

  no synchronization

exit-address-family

!

address-family vpnv4

  neighbor 1.1.1.1 activate

  neighbor 1.1.1.1 send-community both

exit-address-family

!

address-family ipv4 vrf B

  neighbor 10.10.45.5 remote-as 5

  neighbor 10.10.45.5 activate

  no synchronization

  exit-address-family











R5(config-router)#do sh run | s bgp

router bgp 5

no synchronization

bgp log-neighbor-changes

network 55.55.55.55 mask 255.255.255.255

neighbor 10.10.45.4 remote-as 1

no auto-summary





_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com<http://www.ipexpert.com>

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>

http://onlinestudylist.com/mailman/listinfo/ccie_rs







--

Thank you,



Steve Di Bias

CCIE #32840

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to