I can never seem to get this to work. I can See routes end to end but I am missing something when I use BGP as the PE - CE protocol. I thought BGP was supposed to be the easy one J
I have full connectivity. And I can see routes Just can't ping. RT4: router bgp 1 no bgp default ipv4-unicast bgp log-neighbor-changes neighbor 1.1.1.1 remote-as 1 neighbor 1.1.1.1 update-source Loopback0 neighbor 10.10.45.5 remote-as 5 ! address-family ipv4 neighbor 1.1.1.1 activate neighbor 10.10.45.5 activate no auto-summary no synchronization exit-address-family ! address-family vpnv4 neighbor 1.1.1.1 activate neighbor 1.1.1.1 send-community both exit-address-family ! address-family ipv4 vrf B neighbor 10.10.45.5 remote-as 5 neighbor 10.10.45.5 activate no synchronization exit-address-family R5(config-router)#do sh run | s bgp router bgp 5 no synchronization bgp log-neighbor-changes network 55.55.55.55 mask 255.255.255.255 neighbor 10.10.45.4 remote-as 1 no auto-summary _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
