no one of them is connected to area 0


On Tue, Mar 6, 2012 at 2:14 PM, Steve Storniak <[email protected]> wrote:

>   Which routers is connected to area 0?
>
>
> Steve
>
>  ------------------------------
> *From: *khaled al-ajeman <[email protected]>;
> *To: *<[email protected]>;
> *Subject: *[OSL | CCIE_RS] need your help please
> *Sent: *Tue, Mar 6, 2012 8:57:33 AM
>
>   Hi fellas,
>
> I have the neighbor relation ship formed between R9 and R98, however, the
> routes are not travelling from R9 AND R98 and vise verse,  can anyone tell
> please why?
>
> Here is my configuration below:
>
> R9
>
> R9(config)#do sh run | s os
> hostname R9
> ip ospf network broadcast
> router ospf 1
> log-adjacency-changes
> passive-interface default
> no passive-interface FastEthernet0/0
> no passive-interface Serial0/1
> network 150.50.69.0 0.0.0.255 area 69
> network 150.50.98.0 0.0.0.127 area 96      ------------------------------
> > I am looking at area 96
>
> R98(config)#do sr | s os
> hostname vlan98
> router ospf 1
> router-id 96.96.96.96
> log-adjacency-changes
> passive-interface default
> no passive-interface FastEthernet0/0
> network 10.10.0.0 0.0.0.0 area 96
> network 10.10.1.0 0.0.0.0 area 96
> network 10.10.2.0 0.0.0.0 area 96
> network 10.10.3.0 0.0.0.0 area 96
> network 10.10.4.0 0.0.0.0 area 96
> network 10.10.5.0 0.0.0.0 area 96
> network 10.10.6.0 0.0.0.0 area 96
> network 150.50.98.0 0.0.0.127 area
> 96        ------------------------------ area 96
>
> the neighbor relationship forming bet R9 AND R98
>
>
> R9
>
> R9(config)#do sh ip os nei
> Neighbor ID    Pri  State          Dead Time  Address        Interface
> 200.0.0.6        1  FULL/DR        00:00:32    150.50.69.6    Serial0/1
> 96.96.96.96      1  FULL/DR        00:00:32    150.50.98.10
> FastEthernet0/0            --------------- successfully forming
> relationship with R98
> R98
>
> R98(config)#DO SH IP OS NEI
> Neighbor ID    Pri  State          Dead Time  Address
> Interface                        --------------------- successfully forming
> relationship with R9
> 200.0.0.9        1  FULL/BDR        00:00:34    150.50.98.9
> FastEthernet0/0
>
>
> thanks so much fellas
>
> khaled
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com <http://www.platinumplacement.com/>
>
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to