It is 0x2142
From: Les Waller [mailto:[email protected]] Sent: Friday, March 02, 2012 6:42 PM To: Mohammad Zahid Stanikzai Cc: Joe Danrich; [email protected] Subject: Re: [OSL | CCIE_RS] Access=Server What is the config-register setting? Do a "show ver" You should have Configuration register is 0x2102 Les On Fri, Mar 2, 2012 at 2:11 PM, Mohammad Zahid Stanikzai <[email protected]> wrote: Joe, Not it isn't , the IOS version is c2500-is-l.122-15.T17.bin Tweaking with the protocol number sometimes work. Regards,. Zahid -----Original Message----- From: Joe Danrich [mailto:[email protected]] Sent: Friday, March 02, 2012 8:37 AM To: Mohammad Zahid Stanikzai Cc: 'Edgar Mauricio Diaz Orellana'; 'Jacob Zartmann'; 'Hilton Woods'; [email protected] Subject: Re: [OSL | CCIE_RS] Access=Server Zaid Is the 2511 retaining any of it's configuration? Also what IOS version are you running.. Cheers Joe On 03/01/2012 12:42 PM, Mohammad Zahid Stanikzai wrote: > Yes, > > > > I did the clear line, but when I turn off and restart it second day it > will not work some of them will work and others are giving error. > > > > I use 2511 RJ > > > > > > From: Edgar Mauricio Diaz Orellana [mailto:[email protected]] > Sent: Friday, March 02, 2012 1:05 AM > To: Jacob Zartmann > Cc: Mohammad Zahid Stanikzai;<[email protected]> > Subject: Re: [OSL | CCIE_RS] Access=Server > > > > i read wrong.. sorry for my mistake... just you need to play with show > lines and clear line<number> when it's stuck.. > > > > > > On Thu, Mar 1, 2012 at 5:34 PM, Edgar Mauricio Diaz Orellana > <[email protected]> wrote: > > check my friend the config-register :-) > > > > On Thu, Mar 1, 2012 at 5:04 PM, Jacob Zartmann<[email protected]> wrote: > > If you've got a 2509 or 2511 for access server, you'll a lot of times > need to clear the lines a couple of times before you're able to connect. > > /JZ > > Sent from my iPhone > > > On 01/03/2012, at 18.30, Mohammad Zahid Stanikzai > <[email protected]> wrote: > >> Dears, >> >> >> >> I configured my own lab with the devices listed on ine website and >> other sources and I had purchased Access-Server RJ-45 Series, >> >> >> >> I configured and it works well but I shut the lab off and next day if >> I > want >> to access the routers or switches some of them are access able and >> some > says >> that connection refused by host, it really take my whole time to do >> the whole process again and again spending 2 to 3 hours and then It >> will work, can any one till me why is this doing like this ? >> >> >> >> Regards, >> >> >> >> Zahid >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, >> please > visit www.ipexpert.com <http://www.ipexpert.com/> >> Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com <http://www.ipexpert.com/> > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > > > > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com <http://www.ipexpert.com/> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com <http://www.platinumplacement.com/> http://onlinestudylist.com/mailman/listinfo/ccie_rs -- Les Waller, Network Engineer Home Page: www.leswaller.com <http://www.leswaller.com/> MBA, CISSP, CCNP _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
