Make sure vlan 10 is created on the switches !!! -----Original Message----- From: Waleed Alsherif <[email protected]> Sender: [email protected] Date: Thu, 1 Mar 2012 01:02:25 To: CCIE OSL<[email protected]> Subject: [OSL | CCIE_RS] GNS3 ( 3750 - 3750 ) vlan interface is not working
Hi all, I have connected two devices 3750 ( SW1 & SW2 ) as below but it seems that vlan interface is not working , it is not pinging the other side. I have attached the .net file on SW1: int vlan 10 ip add 10.10.10.1 255.255.255.0 int f1/13 switchport trunk encapsulation dot1q switchport mode trunk switchport trunk native vlan 10 on SW2: int vlan 10 ip add 10.10.10.2 255.255.255.0 int f1/13 switchport trunk encapsulation dot1q switchport mode trunk switchport trunk native vlan 10 ___________________ On SW1: # ping 10.10.10.1 . . . . . Packet sent with a source address of 10.10.10.1 ..... Success rate is 0 percent (0/5) Guy , any idea ? Best Regards Waleed Abdulfattah Alsherif IP and Data Network Engineer CCIE RS (Written) / CCNP / CCNA Mob. 002-01019556246 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
