Hi all,
I have connected two devices 3750 ( SW1 & SW2 ) as below but it seems that
vlan interface is not working , it is not pinging the other side.
I have attached the .net file
on SW1:
int vlan 10
ip add 10.10.10.1 255.255.255.0
int f1/13
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk native vlan 10
on SW2:
int vlan 10
ip add 10.10.10.2 255.255.255.0
int f1/13
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk native vlan 10
___________________
On SW1:
# ping 10.10.10.1
. . . . .
Packet sent with a source address of 10.10.10.1
.....
Success rate is 0 percent (0/5)
Guy , any idea ?
Best Regards
Waleed Abdulfattah Alsherif
IP and Data Network Engineer
CCIE RS (Written) / CCNP / CCNA
Mob. 002-01019556246
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
