Try below EEM script these might be able to help you to detect high CPU problem
process cpu threshold type interrupt rising 90 interval 5 falling 75 interval 5 **** event manager applet start **** event syslog pattern "SYS-1-CPURISINGTHRESHOLD" **** action 0 cli command "enable" **** action 1 cli command "profile task interrupt" **** action 2 cli command "profile 4000F000 4379FFFF 4" **** action 3 syslog msg "start" **** event manager applet stop **** event syslog pattern "SYS-1-CPUFALLINGTHRESHOLD" **** action 0 cli command "enable" **** action 1 cli command "profile stop" **** action 2 cli command "show profile terse | append flash:resterse" **** action 3 syslog msg "STOPED" ---------------------------- event manager applet cpu_mon event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1 get-type exact entry-op gt entry-val 90 exit-op lt exit-val 70 poll-interval 1 action 1.1 syslog msg "------HIGH CPU DETECTED----, CPU: $_snmp_oid_val %" action 1.2 cli command "enable" action 1.4 cli command "show proc cpu | append flash:cpu_mon" action 1.5 cli command "show proc cpu history | append flash:cpu_mon" action 1.6 cli command "show interface | append flash:cpu_mon" action 1.7 cli command "show interface stat | append flash:cpu_mon" action 1.8 cli command "show log | append flash:cpu_mon" action 1.9 cli command "show clock | append flash:cpu_mon" action 1.10 syslog msg " --- CPU: Done ---" ----------------------------------------------------- Please note the following: .You need to apply this script in the config mode on the router. .This script should save the outputs on flash:cpu_mon once you have a CPU utilization more than 60% Check this link http://forums.cisco.com/eforum/servlet/EEM?page=eem&fn=script&scriptId=2303 Regards, Ramcharan Arya CCIE # 28926 On Wed, Nov 2, 2011 at 5:40 PM, manoj kaushal <[email protected]> wrote: > Can you guide me how to put event manager? > > > On Tue, Nov 1, 2011 at 7:10 PM, Ederson Silva Rodrigues < > [email protected]> wrote: > > > Put a event manager in the router to follow the cpu and when it reach to > > 70% send a email to you with the show cpu process, this can help you > > > > 2011/11/1 joe nolan <[email protected]> > > > > > unsubscribe > > > > > > On Tue, Nov 1, 2011 at 8:35 AM, Scott Sierra <[email protected]> > > > wrote: > > > > > > > Apologies - that should be... > > > > > > > > show proc cpu > > > > > > > > Scott > > > > > > > > On 1 November 2011 14:02, manoj kaushal <[email protected]> > wrote: > > > > > > > > > Hi All, > > > > > > > > > > We are using 1811 router for our customers and 1 of 1811 is > showing a > > > > very > > > > > strange behavior. > > > > > > > > > > The router is peaking upto 100% cpu utilisation once or twice a > week > > > even > > > > > though traffic is few kbps. > > > > > > > > > > Any Idea of how to resolve it? > > > > > > > > > > -- > > > > > Kaushal > > > > > _______________________________________________ > > > > > For more information regarding industry leading CCIE Lab training, > > > please > > > > > visit www.ipexpert.com > > > > > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > > > > www.PlatinumPlacement.com <http://www.platinumplacement.com/> < > http://www.platinumplacement.com/> > > > > > > > > > _______________________________________________ > > > > For more information regarding industry leading CCIE Lab training, > > please > > > > visit www.ipexpert.com > > > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > > > www.PlatinumPlacement.com <http://www.platinumplacement.com/> < > http://www.platinumplacement.com/> > > > > > > > > > > > > > > > > -- > > > Joe Nolan > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab training, > please > > > visit www.ipexpert.com > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > > > -- > Kaushal > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
