if they don't have any restriction such as, do not user frame-relay route or
connect command you can go ahead and use. If for troubleshooting, you have to
watch for the task how it's configured.
HTH
> Date: Fri, 15 Apr 2011 13:02:07 -0700
> From: [email protected]
> To: [email protected]; [email protected]
> Subject: [OSL | CCIE_RS] frame relay CONNECT solution
>
> Hi Marko
>
> writing it down here as there would be some helpful inputs from other
> followers as well and might be some real lab exprience helps.
>
> This is regarding the "connect" command for the frame relay that i learned
> during the bootcamp, i like that command and have got into habit of using
> the same, throughout the workbook experience Vol 1 and 3
>
> now would that command still be valid in lab, can we use that and
> specifically in the troubleshooting section, infact my query is more towrds
> the troubleshooting.
>
> What if a task has issue on the frame relay switch and the requirement says
> do not remove the previous configuration , and one end frame-relay route
> command is correct, then i guess we have to follow that path ?
>
>
> Correct //
>
> thanks everyone...
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
