The choice will be yours unless you are restricted. I would get comfortable using both as you want to minimize that amount of time you need to configure something.
HTH On Fri, Apr 15, 2011 at 4:02 PM, vikas purbiya <[email protected]>wrote: > Hi Marko > > writing it down here as there would be some helpful inputs from other > followers as well and might be some real lab exprience helps. > > This is regarding the "connect" command for the frame relay that i learned > during the bootcamp, i like that command and have got into habit of using > the same, throughout the workbook experience Vol 1 and 3 > > now would that command still be valid in lab, can we use that and > specifically in the troubleshooting section, infact my query is more towrds > the troubleshooting. > > What if a task has issue on the frame relay switch and the requirement says > do not remove the previous configuration , and one end frame-relay route > command is correct, then i guess we have to follow that path ? > > > Correct // > > thanks everyone... > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
