Because that way you can only see what is happening on one device. Using slightly different approach with all terminals partially visible, you have much greater situational awareness in the lab, which can be the difference between passing and not passing the lab.
-- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: [email protected] Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Tue, Apr 12, 2011 at 19:49, Michael Smith <[email protected]> wrote: > Hello Marko, > > Now you've peaked my interest, why would you recommend against using that > method? > > > >> From: [email protected] >> Date: Tue, 12 Apr 2011 18:48:24 -0400 >> Subject: Re: [OSL | CCIE_RS] Monitor Size in San Jose >> To: [email protected] >> CC: [email protected]; [email protected]; [email protected] >> >> You can use the terminal server in configuration section, but not in >> the troubleshooting. >> >> However, I strongly advise you not to use that method. >> >> -- >> Marko Milivojevic - CCIE #18427 >> Senior Technical Instructor - IPexpert >> >> FREE CCIE training: http://bit.ly/vLecture >> >> Mailto: [email protected] >> Telephone: +1.810.326.1444 >> Web: http://www.ipexpert.com/ >> >> On Tue, Apr 12, 2011 at 14:37, Michael Smith <[email protected]> wrote: >> > >> > Hello Jay, >> > >> > So guys let me get this straight, the lab isn't based off a terminal >> > server connection? I was wondering if there was any way to bounce around >> > using ctrl+shift+6 then x to jump around. I have my own personal lab at my >> > house and I've become so used to just jumping from one router to another! >> > >> > >> > >> >> Date: Tue, 12 Apr 2011 10:05:23 -0400 >> >> From: [email protected] >> >> To: [email protected] >> >> CC: [email protected] >> >> Subject: Re: [OSL | CCIE_RS] Monitor Size in San Jose >> >> >> >> I'd buy the 24" just for the benefit after the lab. Also, no need to >> >> stop >> >> using PuTTY Connection Manager... you'll waste more time dealing with >> >> individual PuTTY windows than it's worth. >> >> >> >> My advice for screen management comes from Marko. Have 2 stacks of >> >> cascaded >> >> windows - 1 for routers and 1 for switches. Don't change the default >> >> size of >> >> any of the PuTTY windows. With them cascaded you can easily click on >> >> any >> >> window and if they're in order you know which is which. This worked >> >> really >> >> well for me in both my trips to the lab. >> >> >> >> >> >> On Tue, Apr 12, 2011 at 9:31 AM, marc abel <[email protected]> wrote: >> >> >> >> > It probably doesn't matter too much if I practice on a 22" or 24" but >> >> > if I am going to buy a monitor specifically for the purpose why not >> >> > make it match? >> >> > >> >> > On Mon, Apr 11, 2011 at 6:55 PM, Marko Milivojevic >> >> > <[email protected]> >> >> > wrote: >> >> > > I believe it's 22" in all sites. Does it really make any >> >> > > difference? :-) >> >> > > >> >> > > -- >> >> > > Marko Milivojevic - CCIE #18427 >> >> > > Senior Technical Instructor - IPexpert >> >> > > >> >> > > FREE CCIE training: http://bit.ly/vLecture >> >> > > >> >> > > Mailto: [email protected] >> >> > > Telephone: +1.810.326.1444 >> >> > > Web: http://www.ipexpert.com/ >> >> > > >> >> > > On Sun, Apr 10, 2011 at 22:36, marc abel <[email protected]> >> >> > > wrote: >> >> > >> Does anyone know the monitor size for the Route and Switch lab in >> >> > >> San >> >> > >> Jose? I have heard both 22" and 24". Does anyone know which is >> >> > >> right? >> >> > >> I am thinking about going to buy a similar one to practice on. You >> >> > >> know what they say, train like you fight. So I think it's time for >> >> > >> me >> >> > >> to ditch multiple monitors and tabbed terminal windows. No more >> >> > >> printed diagrams either. >> >> > >> >> >> > >> Thank you, >> >> > >> >> >> > >> Marc >> >> > >> _______________________________________________ >> >> > >> For more information regarding industry leading CCIE Lab training, >> >> > please visit www.ipexpert.com >> >> > >> >> >> > > >> >> > _______________________________________________ >> >> > For more information regarding industry leading CCIE Lab training, >> >> > please >> >> > visit www.ipexpert.com >> >> > >> >> >> >> >> >> >> >> -- >> >> >> >> Jay Taylor >> >> CCIE #28391 >> >> @JTIE_6EE7 >> >> _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, >> >> please visit www.ipexpert.com >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> > please visit www.ipexpert.com >> > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
