Using.. putty... Med venlig hilsen | Best regards Thomas Raabo Netværks ansvarlig
_____________________________________________ [email protected] | Direkte: +45 69 10 60 18 | Tlf.: +45 70 23 55 66 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Hanley Sent: 24. februar 2011 13:43 To: Thomas Raabo Cc: [email protected] Subject: Re: [OSL | CCIE_RS] Terminal problems What telnet client are you using? I set mine to send a keepalive every 60 seconds which keeps mine open. On Thu, Feb 24, 2011 at 4:26 AM, Thomas Raabo <[email protected]>wrote: > I have a Cisco 2511 setup up as terminal server.. > > > > Everything works fine except if I leave the session open for a while > without touching it. It simply times out. > > The only way I´am able to get in to my terminal is to clear line > #number > > > > ! > > hostname TermServer > > config-register 0x2102 > > ! > > no enable secret > > ! > > ip subnet-zero > > no ip domain-lookup > > config-register 0x2102 > > ! > > ip host BB1 2001 2.2.2.2 > > ip host BB2 2002 2.2.2.2 > > ip host BB3 2003 2.2.2.2 > > ip host SW1 2005 2.2.2.2 > > ip host SW2 2006 2.2.2.2 > > ip host SW3 2007 2.2.2.2 > > ip host SW4 2008 2.2.2.2 > > ip host FR 2010 2.2.2.2 > > ip host R1 2011 2.2.2.2 > > ip host R2 2012 2.2.2.2 > > ip host R3 2013 2.2.2.2 > > ip host R4 2014 2.2.2.2 > > ip host R5 2015 2.2.2.2 > > ip host R6 2016 2.2.2.2 > > ! > > no chat-script cisco-default > > chat-script cisco-default ABORT ERROR "" "AT Z" OK "ATDT \T" TIMEOUT > 30 \c CONNECT > > ! > > ! > > ! > > interface Loopback0 > > ip address 2.2.2.2 255.255.255.255 > > ! > > interface Ethernet0 > > ip address 1.1.1.1 255.255.255.0 > > ! > > interface Serial0 > > no ip address > > shutdown > > ! > > interface Serial1 > > no ip address > > shutdown > > ! > > ip classless > > no ip http server > > ! > > alias exec bb1 telnet bb1 2001 > > alias exec bb2 telnet bb2 2002 > > alias exec bb3 telnet bb3 2003 > > alias exec sw1 telnet sw1 2005 > > alias exec sw2 telnet sw2 2006 > > alias exec sw3 telnet sw3 2007 > > alias exec sw4 telnet sw4 2008 > > alias exec FR telnet FR 2010 > > alias exec r1 telnet r1 2011 > > alias exec r2 telnet r2 2012 > > alias exec r3 telnet r3 2013 > > alias exec r4 telnet r4 2014 > > alias exec r5 telnet r5 2015 > > alias exec r6 telnet r6 2016 > > alias exec ss sh sess > > alias exec con conf t > > alias exec sr show run > > alias exec sir show ip route > > alias exec sib show ip int brief > > alias exec sdp show cdp nei > > alias exec srb show run | b > > alias exec sri show run int > > ! > > line con 0 > > transport input none > > line 1 16 > > no exec > > transport input telnet > > telnet speed 9600 9600 > > autohangup > > stopbits 1 > > line aux 0 > > line vty 0 4 > > exec-timeout 0 0 > > password cisco > > login > > ! > > end > > > > TermServer# > > > > > > Whats the prob? ;) > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > -- Mark Hanley _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
