I think you are right.... http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a00801365f3.shtml
Thats something ill try right away.... Thomas <http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a00801365f3.shtml> 2011/2/24 Jay Taylor <[email protected]> > I think I may have solved that issue on mine with: > > service tcp-keepalives-in > service tcp-keepalives-out > > > On Thu, Feb 24, 2011 at 4:26 AM, Thomas Raabo <[email protected]>wrote: > >> I have a Cisco 2511 setup up as terminal server…. >> >> >> >> Everything works fine except if I leave the session open for a while >> without >> touching it. It simply times out. >> >> The only way I´am able to get in to my terminal is to clear line #number >> >> >> >> ! >> >> hostname TermServer >> >> config-register 0x2102 >> >> ! >> >> no enable secret >> >> ! >> >> ip subnet-zero >> >> no ip domain-lookup >> >> config-register 0x2102 >> >> ! >> >> ip host BB1 2001 2.2.2.2 >> >> ip host BB2 2002 2.2.2.2 >> >> ip host BB3 2003 2.2.2.2 >> >> ip host SW1 2005 2.2.2.2 >> >> ip host SW2 2006 2.2.2.2 >> >> ip host SW3 2007 2.2.2.2 >> >> ip host SW4 2008 2.2.2.2 >> >> ip host FR 2010 2.2.2.2 >> >> ip host R1 2011 2.2.2.2 >> >> ip host R2 2012 2.2.2.2 >> >> ip host R3 2013 2.2.2.2 >> >> ip host R4 2014 2.2.2.2 >> >> ip host R5 2015 2.2.2.2 >> >> ip host R6 2016 2.2.2.2 >> >> ! >> >> no chat-script cisco-default >> >> chat-script cisco-default ABORT ERROR "" "AT Z" OK "ATDT \T" TIMEOUT 30 \c >> CONNECT >> >> ! >> >> ! >> >> ! >> >> interface Loopback0 >> >> ip address 2.2.2.2 255.255.255.255 >> >> ! >> >> interface Ethernet0 >> >> ip address 1.1.1.1 255.255.255.0 >> >> ! >> >> interface Serial0 >> >> no ip address >> >> shutdown >> >> ! >> >> interface Serial1 >> >> no ip address >> >> shutdown >> >> ! >> >> ip classless >> >> no ip http server >> >> ! >> >> alias exec bb1 telnet bb1 2001 >> >> alias exec bb2 telnet bb2 2002 >> >> alias exec bb3 telnet bb3 2003 >> >> alias exec sw1 telnet sw1 2005 >> >> alias exec sw2 telnet sw2 2006 >> >> alias exec sw3 telnet sw3 2007 >> >> alias exec sw4 telnet sw4 2008 >> >> alias exec FR telnet FR 2010 >> >> alias exec r1 telnet r1 2011 >> >> alias exec r2 telnet r2 2012 >> >> alias exec r3 telnet r3 2013 >> >> alias exec r4 telnet r4 2014 >> >> alias exec r5 telnet r5 2015 >> >> alias exec r6 telnet r6 2016 >> >> alias exec ss sh sess >> >> alias exec con conf t >> >> alias exec sr show run >> >> alias exec sir show ip route >> >> alias exec sib show ip int brief >> >> alias exec sdp show cdp nei >> >> alias exec srb show run | b >> >> alias exec sri show run int >> >> ! >> >> line con 0 >> >> transport input none >> >> line 1 16 >> >> no exec >> >> transport input telnet >> >> telnet speed 9600 9600 >> >> autohangup >> >> stopbits 1 >> >> line aux 0 >> >> line vty 0 4 >> >> exec-timeout 0 0 >> >> password cisco >> >> login >> >> ! >> >> end >> >> >> >> TermServer# >> >> >> >> >> >> Whats the prob? ;) >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
