Switches don't use settings from the config-register, so yes - it's OK to have it 1111.
-- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: [email protected] Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Wed, Feb 23, 2011 at 11:22, cyrus riobah <[email protected]> wrote: > Thanks Nicolas, > > But you mean normal in that all switches has the value 0xF? I dont want to > go to ROMMON mode for now, just wamted to know why its 0xF and not 0x2102 > or > 0x2142. > > 0x2102 is the default settings - Cisco recommended for loading the current > configuration after reload or power cycle. > 0x2102 means that the device ignores the saved configuration and instead > boots up using default (blank) configuration. > 0xF ??????? > > Are the 0x2102 & 0x2142 for routers and 0xF for switches? Or how is it? > > Confused! > > > Cyrus > > On Wed, Feb 23, 2011 at 1:53 PM, Nicolas MICHEL <[email protected] > >wrote: > > > yes this is normal. if you want to bypass the IOS , reload the switch and > > push the button on the front side . wait 20s and you are in rommode :) > > > > > > > > > > 2011/2/23 cyrus riobah <[email protected]> > > > >> Hi, > >> > >> Is it normal to have cat 3560 switch configuration register set to 0xF > as > >> depicted below from sh ver command? Any document with config register > >> info? > >> > >> Will appreciate your contributions. > >> > >> > >> 512K bytes of flash-simulated non-volatile configuration memory. > >> Base ethernet MAC Address : 00:26:98:4B:D3:80 > >> Motherboard assembly number : 73-9897-10 > >> Power supply part number : 341-0097-02 > >> Motherboard serial number : FDO13300EYG > >> Power supply serial number : AZS13281290 > >> Model revision number : H0 > >> Motherboard revision number : A0 > >> Model number : WS-C3560-24TS-S > >> System serial number : FDO1330X01H > >> Top Assembly Part Number : 800-26160-05 > >> Top Assembly Revision Number : A0 > >> Version ID : V05 > >> CLEI Code Number : COMFG00BRA > >> Hardware Board Revision Number : 0x01 > >> > >> > >> Switch Ports Model SW Version SW Image > >> ------ ----- ----- ---------- ---------- > >> * 1 26 WS-C3560-24TS 12.2(46)SE > >> C3560-ADVIPSERVICESK9-M > >> > >> > >> Configuration register is 0xF > >> > >> Regards > >> > >> Cyrus > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > please > >> visit www.ipexpert.com > >> > > > > > > > > -- > > Nicolas MICHEL > > Ingenieur Réseaux et Securité (CCNA/CCNP) > > > > > > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
