yes this is normal. if you want to bypass the IOS , reload the switch and push the button on the front side . wait 20s and you are in rommode :)
2011/2/23 cyrus riobah <[email protected]> > Hi, > > Is it normal to have cat 3560 switch configuration register set to 0xF as > depicted below from sh ver command? Any document with config register info? > > Will appreciate your contributions. > > > 512K bytes of flash-simulated non-volatile configuration memory. > Base ethernet MAC Address : 00:26:98:4B:D3:80 > Motherboard assembly number : 73-9897-10 > Power supply part number : 341-0097-02 > Motherboard serial number : FDO13300EYG > Power supply serial number : AZS13281290 > Model revision number : H0 > Motherboard revision number : A0 > Model number : WS-C3560-24TS-S > System serial number : FDO1330X01H > Top Assembly Part Number : 800-26160-05 > Top Assembly Revision Number : A0 > Version ID : V05 > CLEI Code Number : COMFG00BRA > Hardware Board Revision Number : 0x01 > > > Switch Ports Model SW Version SW Image > ------ ----- ----- ---------- ---------- > * 1 26 WS-C3560-24TS 12.2(46)SE > C3560-ADVIPSERVICESK9-M > > > Configuration register is 0xF > > Regards > > Cyrus > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > -- Nicolas MICHEL Ingenieur Réseaux et Securité (CCNA/CCNP) _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
