You config is correct and the output from "sho int blah" is correct. Try
this one ...
blackhole(config-if)#do sho queueing | i Que
Queueing strategy: random early detection (WRED)
blackhole(config-if)#
HTH,
M
On Sat, Jan 8, 2011 at 2:26 PM, Jay McMickle <[email protected]> wrote:
> IPExperts-
> While working with Lab21.4 WRED, I enter my commands and see the queueing
> strategy changed from FIFO.
>
> However, the solution guide shows it moving from FIFO to WRED, but mine
> only
> shows RED. I verified my commands are the same as the solution guide and
> they
> were entered in the correct order. Why does mine only show RED, and
> shouldn't
> there be something that triggers it to be W (weighted) in WRED?
>
> R6(config-if)#do sh run int f0/0
> Building configuration...
> Current configuration : 208 bytes
> !
> interface FastEthernet0/0
> ip address 150.100.220.6 255.255.255.0
> duplex auto
> speed auto
> random-detect
> random-detect flow
> random-detect flow count 128
> random-detect flow average-depth-factor 16
> end
>
> R6(config-if)#do sh int f0/0 | in Que
> Queueing strategy: random early detection(RED)
>
>
> Regards,
> Jay McMickle- CCNP, CCSP, CCDP, MCSE
> http://mycciepursuit.wordpress.com/
>
>
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
