IPExperts- While working with Lab21.4 WRED, I enter my commands and see the queueing strategy changed from FIFO.
However, the solution guide shows it moving from FIFO to WRED, but mine only shows RED. I verified my commands are the same as the solution guide and they were entered in the correct order. Why does mine only show RED, and shouldn't there be something that triggers it to be W (weighted) in WRED? R6(config-if)#do sh run int f0/0 Building configuration... Current configuration : 208 bytes ! interface FastEthernet0/0 ip address 150.100.220.6 255.255.255.0 duplex auto speed auto random-detect random-detect flow random-detect flow count 128 random-detect flow average-depth-factor 16 end R6(config-if)#do sh int f0/0 | in Que Queueing strategy: random early detection(RED) Regards, Jay McMickle- CCNP, CCSP, CCDP, MCSE http://mycciepursuit.wordpress.com/ _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
