Can you provide the configuration of EIGRP on all 3 routers?
From: Ananthan [mailto:[email protected]] Sent: December-29-10 5:52 PM To: Jason Maynard Cc: Jay Taylor; [email protected] Subject: [Bulk] Re: [OSL | CCIE_RS] Volume 2 Lab 10 Qn 3.6 Redistribution OSPF/EIGRP Hi Jason, This one before change the metric weights... The purpose of changing weights is R7 load balance between R5&R6 . But its automatically load balanced.. In my understanding changing delay effect on incoming metrics value ie. if we change delay on R5 Fa0/1 its effect on metric the routes coming from that interface. Correct me if i wrong.. On Thu, Dec 30, 2010 at 3:13 AM, Jason Maynard <[email protected]> wrote: Have you modified the metric weights? Jason Maynard _____ From: Jay Taylor <[email protected]> To: Ananthan <[email protected]> Cc: [email protected] Sent: Wed, December 29, 2010 12:23:20 PM Subject: Re: [OSL | CCIE_RS] Volume 2 Lab 10 Qn 3.6 Redistribution OSPF/EIGRP Without knowing anything other than how R5/6/7 are physically connected via Ethernet the only obvious thing I see is both of the entries in the EIGRP topology table are using Fa0/0 but the delay change on R5 was made on Fa0/1. On Tue, Dec 28, 2010 at 9:42 PM, Ananthan <[email protected]> wrote: > HI All, > > After i redistribute mutually its seems R7 got 2 equal path on its top > table... But one of the previous section we did delay on R5 int fa0/1 to > 5000 usec. > Here is my out put .. anybody clarify ?? > > > R5(config-if)#do sh int fas0/1 | sec DLY > MTU 1500 bytes, BW 100000 Kbit/sec, DLY 5000 usec, > reliability 255/255, txload 1/255, rxload 1/255 > > > R6(config-router)#do sh int fas0/0 | sec DLY > MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, > reliability 255/255, txload 1/255, rxload 1/255 > > > R7(config)#do sh ip eigrp top 200.0.0.2 255.255.255.255 > IP-EIGRP (AS 1): Topology entry for 200.0.0.2/32 > State is Passive, Query origin flag is 1, 2 Successor(s), FD is 2588160 > Routing Descriptor Blocks: > 192.168.100.5 (FastEthernet0/0), from 192.168.100.5, Send flag is 0x0 > Composite metric is (2588160/2585600), Route is External > Vector metric: > Minimum bandwidth is 1000 Kbit > Total delay is 1100 microseconds > Reliability is 255/255 > Load is 1/255 > Minimum MTU is 1500 > Hop count is 1 > External data: > Originating router is 200.0.0.5 > AS number of route is 1 > External protocol is OSPF, external metric is 65 > Administrator tag is 0 (0x00000000) > 192.168.100.6 (FastEthernet0/0), from 192.168.100.6, Send flag is 0x0 > Composite metric is (2588160/2585600), Route is External > Vector metric: > Minimum bandwidth is 1000 Kbit > Total delay is 1100 microseconds > Reliability is 255/255 > Load is 1/255 > Minimum MTU is 1500 > Hop count is 1 > External data: > Originating router is 200.0.0.6 > AS number of route is 1 > External protocol is OSPF, external metric is 65 > Administrator tag is 0 (0x00000000) > > R7(config)#do sh ip eigrp top | sec 200.0.0.2 > P 200.0.0.2/32, 2 successors, FD is 2588160 > via 192.168.100.5 (2588160/2585600), FastEthernet0/0 > via 192.168.100.6 (2588160/2585600), FastEthernet0/0 > > > Thanks .. > -Ananthan > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
