HI All,
After i redistribute mutually its seems R7 got 2 equal path on its top
table... But one of the previous section we did delay on R5 int fa0/1 to
5000 usec.
Here is my out put .. anybody clarify ??
R5(config-if)#do sh int fas0/1 | sec DLY
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
R6(config-router)#do sh int fas0/0 | sec DLY
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
R7(config)#do sh ip eigrp top 200.0.0.2 255.255.255.255
IP-EIGRP (AS 1): Topology entry for 200.0.0.2/32
State is Passive, Query origin flag is 1, 2 Successor(s), FD is 2588160
Routing Descriptor Blocks:
192.168.100.5 (FastEthernet0/0), from 192.168.100.5, Send flag is 0x0
Composite metric is (2588160/2585600), Route is External
Vector metric:
Minimum bandwidth is 1000 Kbit
Total delay is 1100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 1
External data:
Originating router is 200.0.0.5
AS number of route is 1
External protocol is OSPF, external metric is 65
Administrator tag is 0 (0x00000000)
192.168.100.6 (FastEthernet0/0), from 192.168.100.6, Send flag is 0x0
Composite metric is (2588160/2585600), Route is External
Vector metric:
Minimum bandwidth is 1000 Kbit
Total delay is 1100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 1
External data:
Originating router is 200.0.0.6
AS number of route is 1
External protocol is OSPF, external metric is 65
Administrator tag is 0 (0x00000000)
R7(config)#do sh ip eigrp top | sec 200.0.0.2
P 200.0.0.2/32, 2 successors, FD is 2588160
via 192.168.100.5 (2588160/2585600), FastEthernet0/0
via 192.168.100.6 (2588160/2585600), FastEthernet0/0
Thanks ..
-Ananthan
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
