Gentlemen, I found the TSHOOT exam topology that Cisco published and I've been working on recreating it for practice. I'm glad I did as it's shown me some holes in my current knowledge. The layer 2/3 diagram can be found here: http://imgur.com/IjZIM.png and the routing diagram can be found here: http://imgur.com/XP3Ns.png
Issues I've been fighting: 1) The 0.0.0.0 route isn't working like I'd expect. I have set the 0.0.0.0 route to point to the ISP router which is 209.65.200.226. Although the route shows up in R2 and R3 because of the default-information originate command on R1, it doesn't seem to work. I can't ping anything past 209.65.200.225 (s0/1 on R1) from R3 or R2. 2) Since R4 is Totally NSSA I'm not seeing the 0.0.0.0 route at all on it. How do you get around this? 3) I've never had to do two way redistribution like this, it's rather messy. My first thought was make two access lists for my route-maps, one for the networks in EIGRP and one for the networks in OSPF. Though that will work it seems like there has to be a better or easier way. What's the best practice here? Thanks, Mitch _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
