Thank you Joe, very helpful!

On Thu, Oct 22, 2009 at 10:57 AM, Joe Astorino <[email protected]> wrote:
> So to clarify based on the testing I've done this morning it looks like the
> book is correct in that when using CBWFQ you can not mix and match but with
> LLQ you can
>
> On Thu, Oct 22, 2009 at 11:31 AM, Joe Astorino <[email protected]>
> wrote:
>>
>> class-map match-all foo2
>>  match protocol ftp
>> class-map match-all foo
>>  match protocol http
>> policy-map policy
>>  class foo
>>     bandwidth percent 20
>>  class foo2
>> R1(config-pmap-c)#bandwidth remaining percent 20
>> Mixed bandwidth types are not supported. Pls configure bandwidth command
>> either in kbps, percent, remaining percent or ramaining ratio but not mixed
>>
>> On Thu, Oct 22, 2009 at 11:03 AM, marc abel <[email protected]> wrote:
>>>
>>> I had previously understood that in CBWFQ and LLQ that you could
>>> intermix Bandwidth Percent and Bandwith Percent Remaining freely but
>>> that if you used the absolute bandwith command it was exclusive of
>>> those commands.
>>>
>>> Reviewing the CCIE exam cert guide 3.0 makes a different case though.
>>> It says that you can not mix any of the types for CBWFQ meaning you
>>> can't even use percent and percent remaining in the same policy. But
>>> with LLQ you can mix all 3 types. Is this correct?
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>
>>
>>
>> --
>> Regards,
>>
>> Joe Astorino CCIE #24347 (R&S)
>> Sr. Technical Instructor - IPexpert
>> Mailto: [email protected]
>> Telephone: +1.810.326.1444
>> Live Assistance, Please visit: www.ipexpert.com/chat
>> eFax: +1.810.454.0130
>>
>> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA
>> (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security &
>> Service Provider) Certification Training with locations throughout the
>> United States, Europe and Australia. Be sure to check out our online
>> communities at www.ipexpert.com/communities and our public website at
>> www.ipexpert.com
>>
>>
>
>
>
> --
> Regards,
>
> Joe Astorino CCIE #24347 (R&S)
> Sr. Technical Instructor - IPexpert
> Mailto: [email protected]
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S,
> Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service
> Provider) Certification Training with locations throughout the United
> States, Europe and Australia. Be sure to check out our online communities at
> www.ipexpert.com/communities and our public website at www.ipexpert.com
>
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to