class-map match-all foo2
match protocol ftp
class-map match-all foo
match protocol http
policy-map policy
class foo
bandwidth percent 20
class foo2
R1(config-pmap-c)#bandwidth remaining percent 20
Mixed bandwidth types are not supported. Pls configure bandwidth command
either in kbps, percent, remaining percent or ramaining ratio but not mixed
On Thu, Oct 22, 2009 at 11:03 AM, marc abel <[email protected]> wrote:
> I had previously understood that in CBWFQ and LLQ that you could
> intermix Bandwidth Percent and Bandwith Percent Remaining freely but
> that if you used the absolute bandwith command it was exclusive of
> those commands.
>
> Reviewing the CCIE exam cert guide 3.0 makes a different case though.
> It says that you can not mix any of the types for CBWFQ meaning you
> can't even use percent and percent remaining in the same policy. But
> with LLQ you can mix all 3 types. Is this correct?
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
--
Regards,
Joe Astorino CCIE #24347 (R&S)
Sr. Technical Instructor - IPexpert
Mailto: [email protected]
Telephone: +1.810.326.1444
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130
IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S,
Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service
Provider) Certification Training with locations throughout the United
States, Europe and Australia. Be sure to check out our online communities at
www.ipexpert.com/communities and our public website at www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
